We are a
leading manufacturer
of paint and wire products in the Philippines.
Illinois Hi-Solid Clear Gloss Lacquer
Wood | Topcoats
A nitrocellulose based lacquer specially formulated to give excellent finish on any delicate and expensive wood works for both exterior and interior purposes, as it imparts good film characteristics such as gloss, durability and toughness to match severe tropical weather conditions.
Technical Specifications
COLOR: colorless clear
APPEARANCE: gloss
VISCOSITY: 60-70 seconds FC #4 at 28 °C
THEORETICAL DENSITY: 0.88 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 21%
THEORETICAL COVERAGE: 25-30 m2/4 literat 50 microns DFT (excluding applicationvariation and substrate porosity factors)
- to touch: 10-15 minutes
- tack free: 1⁄2-1 hour
- hard: 4-6 hours
Application
METHOD OF APPLICATION: spray
PAINTING SYSTEM: Reduce 1 part by volume Illinois Clear Gloss Lacquer to 2 parts Illinois Lacquer Thinner to approximately 11-14 seconds FC #4. Using brush or rolled cloth, apply Illinois NGR Penetrating Woodstain on bare wood. Leave until totally dry. Recoat if darker shade is necessary. Allow to dry. For better inter-coat adhesion, apply with Illinois Lacquer Sanding Sealer. To enhance gloss and durability, use Illinois Hi-Solid Clear Gloss Lacquer as topcoat.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.